Deactivated Concrete
In stock
Product shipped in 48h
Deactivated Concrete is a turning off of the surface to highlight the aggregates contained in the concrete by removing the surface layer of the concrete. It allows you to perform a concrete aspect gravelled and slip-resistant for your outside.
Packaging
Granulometry
Description
Description
Harmony Deactivator is an aqueous surface deactivation agent, which poses no hazard to users and is harmless to the environment.
It can be used to delay the hydration of cement in an unshuttered concrete surface to a depth of 2mm for granulates of size 5 - 8 mm.
The final cleaning of concretes treated by this method will then allow the granulates to show through.
Characteristics
Type: surface deactivation agent
Colours:
- red for granulates of size 0/2 mm.
- blue for granulates of size 2/4 mm.
- orange for granulates of size 4/ 6-8 mm.
Packaging: 5 l / 20 l
Dosage: 1 l for 4 - 5m2
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Tools & Cleaning
Sprayer, protective goggles and gloves.
Clean tools in water after user.
Prepare the support
To achieve good results, it is important that concrete should be of uniform consistency.
Thoroughly moisten the bottom of the mold to avoid cracks.
Always respect the dosage information.
For a homogeneous result, add Harmony Liquefying agent.
Carefully smooth the surface of the concrete without tipping too much.
The surface should always be flat, no holes and no waves.
Application
After pouring and smoothing the concrete, wait for any bleed water to disappear
(approximately 30 minutes after pouring).
Before use, Harmony Deactivator should be homogenized by shaking.
Apply Harmony Deactivator in a uniform manner, using a spray system (nozzle with 0.79 mm opening, pressure of 2/4 bar).
Washing of concrete:
Concrete will be washed with water at a pressure of 100 bar.
The operator must take care to maintain a distance of 20 - 40 cm between the nozzle and the concrete surface.
The water jet must be applied at an angle of 45° to the concrete surface to be deactivated.
Time window for washing:
4 – 24 hours after application.
In conditions of severe exposure to wind and sunlight, washing should be completed between 4 and 12 hours if the temperature is lower than 35°C, and between 4 and 8 hours, if the temperature is higher than 35°C.
Payment and delivery
Payment
We guarantee a secure payment by
Delivery
- Shipped within 48 hours After reception of payment. . Period for carriage between 2 and 4 days
- Delivery to the following countries
France, Belgium, Luxembourg, Germany, Austria, Poland. - For Corsica, the DOM/TOM and other destinations in Europe, please contact us so that we can assess the shipping costs
Customer Service
You can contact us
- via chat : at the bottom right
- via telephone : 04 42 20 10 09
from Monday to Wednesday from 8:00 a.m. to 8:00 p.m.
from Tuesday to Friday from 8:00 a.m. to 12:00 a.m. - via email : At the following address
contact@harmony-beton.com
Features
Type of room | Path-path to Terrace Tower pool |
---|---|
Support current | Dalle béton |
Capacity | 5 L |
Consumption | 1 L pour 4m² |
Cleaning | Water |
Compliant | NF EN 13813 |
Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
Project | Ground |
Destination (extérieur) | Chemin - Parking Terrasse Tour de piscine |
Projet (extérieur) | Sol |
Support (extérieur) | Chape fluide ciment Dalle béton |
Surface (extérieur) | Supérieur à 10m² |
Product instructions
Reviews
Related products
Special Protection support closed
You may also like
- On sale!
- -35%
- On sale!
- -35%