Varnish Hydro® special concrete

Description

Harmony Hydro Lacquer is a water-repellent impregnating agent based on fluorocarbon that protects and beautifies all concrete surfaces in the interior.

Characteristics

Type: One-component resin emulsion in aqueous phase

Colour: White/transparent

pH: 3-4

Dosage: 1 l = 10 - 12 m2 per coat

Packaging: 1 l, 5 l, 20 l

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Tools & Cleaning

Microfibre mop, broom, gloves, overshoes.

Clean tools in water after use.

Preparation

The base surface must be resistant, sound, solid, clean, dry and free of humidity.

Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).

The subsurface / existing concrete must be at least 21 days old.

Caution: Check that the floor has not been worked with a curing product. If so, we recommend stripping the existing cure product with Harmony Décap Curing Agent.

Application

Application temperature: Minimum 10 °, Maximum 25 °.

Avoid draught.

So that the hydro-lacquer does not dry too quickly during the application, it is recommended to moisten the floor slightly before.

Apply a thin, even film with a microfibre mop.

Pay attention to the dosage: 1 litre per 10 m2.

After 2 - 3 hours, a second coat can be applied.

Dosage: 1 litre per 10 m2.

Drying time: 24 hours.