Harmony Kit Cement glue

Description

Harmony Cement Glue is based on hydraulic binders modified with additives and high

performance resins.

Use as a primer for Harmony Béton Ciré, to fill the joints of the tiles and to create an even,

surface / to bring the level back to zero.

Characteristics

Type: Cement Glue

Particle size: 0/0,5mm

Packaging: 4 kg, 10 kg, 20 kg

Adhesion to normalised concrete:> 2,2 MPa

Dosage: 1,8 kg / m2 for 10 - 12 m2 at a thickness of 1 mm

Drying time: 6 - 8 hours (room temperature); recoatable after 12 hours

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Compliant with standard NF EN 13813

Tools

stainless steel smoother, sponge, gloves.

Clean tools in water after use.

Preparation

The base surface must be resistant, sound, solid, clean, dry and free of humidity.

Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove

grease, oil etc).

Before applying, prime the floor with Harmony Prime Plus.

Apply the primer evenly, being careful not to leave any spots.

Drying time: 30 minutes to 2 hours, depending on the nature of the substrate and the ambient

temperature. Once the primer is dry, the cement glue can be applied.

Application

Harmony Cement Glue is supplied ready for use.

Mix 20 kg of cement paste with 5.5 to 6 litres of water in the mixer for at least 3 minutes.

For 8 kg, mix 2 to 2.4 litres of water.

For 4 kg, mix 1 to 1.2 litres of water.

Apply with the stainless steel smoother on the tiles.

The surface (joint and tiles) must be completely covered.

Smooth well to eliminate all irregularities. Then refine surface with a sponge or spatula.

Do not use in frost conditions.

Drying time: 6 to 8 hours, depending on ambient temperature and humidity.