Free delivery for waxed concrete kit from 10m²
In stock
Product shipped in 48h
Designed for media that is closed, non-absorbent or smooth.
Harmony Prim Plus is a primary adhesion of the aqueous phase to support the closed, non-absorbent or smooth type :
Use before the application of Harmony waxed Concrete or Harmony Spray Concrete.
Harmony Primer Plus is a water-based, solvent-free synthetic acrylic styrene copolymer resin-based bonding primer for application to non-porous or smooth base surfaces, such as timber, paint, old tiling, power floated concrete, etc.
Harmony Primer Plus enhances cohesion and improves the hydration of renderings.
Type: Bonding Primer
Colour: white liquid (Primer Plus)
Packaging: 1 l, 5 l
Dosage: 1 l for 10 - 12 m2 (varies, depending on porosity)
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Caution: Sensitive to frost!
Roller, gloves.
Clean tools in water after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).
It is essential to establish whether the base surface is porous or non-porous.
To do this, apply a few drops of water to the surface concerned. If the water is absorbed, the base surface is porous. If not, it is classified as non-porous.
On a porous base surface, apply Harmony Primer, and on a non-porous base surface, apply Harmony Primer Plus.
On a wet base surface, such as a shower, sink, washbasin or, more generally, any porous base surface (plaster, timber, syporex, BA 13, etc.) which is in regular contact with water and has not been sealed beforehand, Harmony Epoxy Primer or Harmony waterproof under-sealer should be applied.
Apply glass-fibre reinforcing strips at corners.
Application must be completed within a temperature range of 5° - 25°.
Harmony Primer Plus is supplied ready for use, but can be diluted (max 50%). Apply uniformly to the base surface using a roller, with no excess thickness and leaving no gaps.
For large surface areas, use the 250 or 500 mm PermaPro special floor nozzle.Drying time: 30 minutes - 2 hours, depending upon the type of base surface and the ambient temperature.
Once touch dry, Harmony Primer Plus is ready to be covered. On a highly porous base surface, such as anhydrite screed, a second coat should be applied.
We guarantee a secure payment by
You can contact us
| Capacity | 1 L |
|---|---|
| Consumption | 1L to 10m2 |
| Cleaning | Water |
| Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
| Warranty | RC manufacturer |
Special sleeve for floor on handle
Primary grip Harmony Prim epoxy
